Paul walker

Paul walker

Boost
3
1
0

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.08mm layer, 2 walls, 15% infill
0.08mm layer, 2 walls, 15% infill
Designer
4.9 h
1 plate

Boost
3
1
0
0
1
0
Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x160mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
Pla JAYO Black Transmission Distance: 0.3
Pla JAYO Gray Transmission Distance: 2.5
Pla GEETECH Gray Transmission Distance: 3
Pla JAYO White Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Gary
At layer #13 (1.12mm) swap to Gary
At layer #20 (1.68mm) swap to White for the rest.

*** WARNING ***
WHEN SCALING THE MODEL, BE SURE TO NOT SCALE THE Z-HEIGHT!
The Z-height must always be as original, otherwise the print
is messed up.

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more