Unicorn

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA PolyLite Blue Transmission Distance: 1.8
PLA PolyLite Azure Blue Transmission Distance: 3.2
PLA PolyLite Purple Transmission Distance: 0.5
PLA PolyLite Pink Transmission Distance: 3.2
PLA PolyLite Lemon Yellow Transmission Distance: 4.7
PLA+ GST3D White Transmission Distance: 5.8
This print uses 6 unique filaments

Swap Instructions:
Start with Blue
At layer #21 (0.96mm) swap to Azure Blue
At layer #30 (1.32mm) swap to Purple
At layer #36 (1.56mm) swap to Pink
At layer #41 (1.76mm) swap to Lemon Yellow
At layer #43 (1.84mm) swap to White for the rest.