Momo is a mix breed of British short hair and persian that has been accompany us for the past 13 years .In memory of Momo, this hueforge is created on what a good car he is.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 136.64x161.77mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.5mm
Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Grey
At layer #10 (0.88mm) swap to White for the rest.