Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used:
PLA BambuLab Matte Charcoal Black Transmission Distance: 0.3
PLA Polyterra Army Dark Green Transmission Distance: 0.2
PLA PolyTerra Muted Green Transmission Distance: 0.3
PLA Polyterra Muted White Transmission Distance: 0.9
PLA BambuLab Matte White Transmission Distance: 3.5
This print uses 5 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #12 (0.6mm) swap to Army Dark Green
At layer #17 (0.8mm) swap to Muted Green
At layer #27 (1.2mm) swap to Muted White
At layer #34 (1.48mm) swap to White for the rest.