Mickey Mouse/Topolino by Geoka

Geoka

Art>Sculptures

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 10% infill

Designer

20 h

3 plates

5.0(8)

0.2mm layer, 3 walls, 10% infill

57.7 h

6 plates

3.3(3)

Mickey Mouse colored with less waste

10.5 h

4 plates

Open in Bambu Studio

Boost

313

438

655

Released

Description

Mickey Mouse ready to print designed by us and then adapted for fdm printing in a modular way so as to have the best quality and ease of printing, it is 35 cm high, there are pins to be able to glue it better and make it stronger. as glue I used Super Attack for plastic. I printed it in pla. Share photos of your prints by coloring them to your liking. who will be the most creative?

Comment & Rating (22)

@Pauliboiiii

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

The coloring was a little weird. The holes for the hinges had a different color than the outside, which caused unnecessary filament changes. Also, the bottom layer of the torso pieces consist of a single color, which causes an ugly line in the middle of the finished product. Other than that, my only problems were my fault. Going to upload a remix to the model when I finish my second nicer one.

(Edited)

@matthew95

I'm sorry you had to throw away time and material, unfortunately there are people who load colored prifiles without even trying the print

(Edited)

@Pauliboiiii

Boosted

Replying to @matthew95 :

Your model is excellent, no need to apologize. I will upload a tweaked version of this print profile for future users. It leaves less waste and does not have the middle line.

(Edited)

@matthew95

Replying to @Pauliboiiii :

wonderful, thanks for the help guys

(Edited)

@Pauliboiiii

Boosted

Very nice

The designer has replied

@matthew95

wonderful

@Coke2709

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

Colours a bit inaccurate on the edges - but rest was perfect! Thank you!

@partoco

Print Profile

0.2mm layer, 3 walls, 10% infill

The designer has replied

@matthew95

nice print

@user_2770294795

Boosted

Printing now. Love the model.

The designer has replied

@matthew95

great, let us share the results with a nice picture

@Mikechrjensen

Print Profile

0.2mm layer, 3 walls, 10% infill

love it

The designer has replied

@matthew95

Thank you, can u post the photo of your print?

(Edited)

@schreinereijuer

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

sehr saubere Verbindungen,tolles Model

The designer has replied

@matthew95

Vielen Dank, ich bin froh, dass es Ihnen gefällt.

@Gunnar.dinter

how tall is it? and please post a small guide how to stuck it together. is there any to todo after sticking it together?

@cyberdal

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

@cedric.malisz

Print Profile

0.2mm layer, 3 walls, 10% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Mouse Toy for your Cat

SimonMakerForge

Magic Hand Mickey Mouse Pencil Holder

RealNationPrint

205

275

MICKEY MOUSE COOKIE CUTTER SET

Cookie Cutter Rodriguez

mickey mouse

lucamoretti86