A compact but rugged design that allows you to store the toothbrush without removing the brush head.
Designed to just fit in 180mm x 180mm plate diagonally, so you can print it with your A1 mini without any issue. You can speed up the print process if your printer has a larger plate by rearranging the models.
Highly precise dimension design, just fit the toothbrush without any shaking room after close the lid
Well structured to keep the toothbrush stay in the middle of the case, and specially designed airflow holes to keep the inner case well ventilated
Although the size difference is small among three versions (less than 1mm difference in width and length, same height), I still separately designed and upload 3 versions carrying cases, please choose the corresponding printing profile based on your toothbrush to achieve a perfect tight fit.
2. Model Specifications
Dimensions: 46.2mm (H) x 218.5mm (W) x 58.5mm (D)
Weight: ~130g
Material & Color Recommendations:
I found White Marble workes great for this case design
3. Printing Parameters
Layer Height: 0.08mm is recommended to ensure a smooth finish
Infill Percentage: 15% for optimal balance of strength and material usage.
Support/Adhesion: No support
Plate: both textured plate and smooth PEI Plate worked great, but I like the textured plate more
4. Assembly Instructions
This case requires 6x m3x30 screws to assemble works as hinge and snap structure. If you don't have M3x30, please comment below, I can change the model to provide more options.
The assembly process is quite straightforward, only one point worth mentioning: Insert the screw from outside (because the inner circles are smaller than the outer ones to perfectly fix the screws in place)
And TA-DA, there you have it!
Although I only tested on my ABS toothbrush, but I believe it also works for the Stainless Steel and Aluminum Alloy ones, since the rest two are slight smaller than the ABS one.
5. Gallery of Finished Prints
Leave a comment and post your prints! I will highlight here!
6. Version History and Updates
2024/05/24 Update
Upload three versions of the carrying case to match 3 versions of toothbrush separately to achieve a perfect tight fit for each one
2024/05/12 Update
Initial upload.
7. Support Me
Elevate Your Toothbrush's Travel Style and Show Your Support for Design Innovation!
Looks very good and I would love to print it (bought some marble pla just for this). though, I only have 20mm m3 screws, so if you would provide a model, I would be really grateful!