Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 152.34x249.99mm in size

Filaments Used:

PLA BambuLab Matte Ivory White Transmission Distance: 3.5
PLA BambuLab Matte Dark Blue Transmission Distance: 0.1
PLA BambuLab Basic Black Transmission Distance: 0.2
PLA BambuLab Basic Red Transmission Distance: 3.8

Swap Instructions:

Start with Ivory White
At layer #22 (1mm) swap to Dark Blue
At layer #33 (1.44mm) swap to Black
At layer #35 (1.52mm) swap to Red
At layer #43 (1.84mm) swap to Ivory White for the rest.