This is a folding propeller made for the Volantex Phoenix 1600, 2000, 2400 gliders.

It works great for the Phoenix 2400, and it should fit just fine for the smaller models too.

Printing info:

-Use 4-5 perimeters
-The model is oriented correctly, don´t rotate it.
-Supports are needed
-If you have the original motor, use PLA. It is stiffer, and bends less.
-If you have a lower torque higher RPM motor, print it with PETG.

-Print it really slow with quality PLA / PETG. Tested with 4S battery, when printed slow, it holds well. If printed fast, it may break.