This is the container for my filament samples shaped as mini-floppydisks that you can find here: https://www.printables.com/it/model/862027-floppydisk-filament-sample

I 3D printed the Storage Box with 0.12 layer height but 0.20 still works fine. No supports needed. I 3D printed the lid in vertical position as my 3D printer can handle that bridge on the nose, but you can also 3D print it in horizontal position with the hinges facing up.

The Storage Box mimics the old floppydisk containers of the 90s so for better results I suggest to use gray, beige or white for the base and trasparent for the lid. PLA or PETG are both good.

There's a preferable way to assemble the lid, as there is a flaring part in the lid hinge.

软盘样品存储盒：这是我设计的迷你软盘形状的耗材样品的容器，您可以在此找到：https://www.printables.com/it/model/862027-floppydisk-filament-sample

我用0.12层高3D打印了存储盒，但0.20的层高也可以正常工作。无需支撑。我将盖子垂直打印，因为我的3D打印机可以处理鼻桥处的桥接，但您也可以将其水平打印，铰链朝上。

存储盒模仿了90年代的旧软盘盒，为了更好的效果，我建议底座使用灰色、米色或白色，盖子使用透明的。PLA或PETG都适用。

盖子的安装有一个推荐方法，因为盖子铰链处有一个喇叭状的部分（见上图）。