Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 199.08x252.00mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.08mm and the Actual Depth is 2.08mm
Filaments Used:
PETG Creality Black Transmission Distance:
PETG Tpoimns Gray Transmission Distance:
PETG Creality White Transmission Distance:
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Gray
At layer #12 (1.04mm) swap to White
At layer #18 (1.52mm) swap to Yellow
At layer #24 (2.00mm) swap to White for the rest.