This is a model to make a set of glowing UV lit rim covers for the Lectric XP ebike with 20inch rims. They should also work with other similar 20inch fat tire rims. You will need to print 4 for each side of the rim (16 total). There is also a small lip that sits on top of the rim to make it easier to align when installing. I used OVERTURE Glow PLA (glow blue) as it matches the color of the lettering during the day. To make these really glow, you will need to use UV led lights and a battery pack (will list below) I used double sided tape to attach to rims. 4 UV LED's will need to be mounted on the fork and rear frame pointed at the rims. The UV will “charge” the glow filiment as the wheels spin. The LED's used have adhesive backing and enough wire to run to a bike bag. You will aslo need any 9 or 12 volt source. Enjoy!

https://a.co/d/2Vn3Nv8 UV LED's (only come in 3 packs)

https://a.co/d/frxF1Lp 12v rechargeable battery pack w/wire connector

https://a.co/d/eIp72Ny 9v battery holder w/switch (wont be as bright as 12v battery)