Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.7mm

Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA Paramount 3D British Racing Green Transmission Distance: 3
PLA PolyTerra Earth Brown Transmission Distance: 0.3
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA Overture Matte White Transmission Distance: 3.7
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to British Racing Green
At layer #8 (0.72mm) swap to Earth Brown
At layer #12 (1.04mm) swap to Savannah Yellow
At layer #16 (1.36mm) swap to White for the rest.