Gear Fidget Keychain Tag Remixed by squinn

Remixed by

squinn

Hobby & DIY>Vehicles

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Standard Profile, 0.2mm layer, 3 walls, 15% infill

Designer

37 min

1 plate

4.6(31)

A1 Mini Print Profile, 0.2mm layer, 3 walls, 15% infill

Designer

40 min

1 plate

4.7(9)

Regular print, 0.2mm layer, 3 walls, 15% infill

33 min

1 plate

5.0(1)

Boost

161

337

376

Released

Description

What better way to pass the time while you're waiting around with your keys than with a fidget toy!

This is a simple print-in-place model, and no supports or brim should be required. Note that if you want to use a regular key ring with this model (such as is shown in the pictures), you'll want to use a larger version (at least 3 cm in diameter) - as smaller versions will be hard to attach.

I designed this model from scratch for a key tag competition, but I'm noting this as a remix of NicoConex's cool gear fidget from which I gained some inspiration. I hope you enjoy!

Comment & Rating (42)

@Markus2801A

Nice idea! Thanks! Maybe the Clearance between the gears could be I little bit smaller.

@bdwilson

Print Profile

Standard Profile, 0.2mm layer, 3 walls, 15% infill

beautiful!

@AtomicimotA

Print Profile

Standard Profile, 0.2mm layer, 3 walls, 15% infill

Neat simplistic design. Easy to print

@pathetap

Print Profile

Standard Profile, 0.2mm layer, 3 walls, 15% infill

Printed a couple and its smoothness seems to depend on the material, though I used PLA for all. If you find it stiff, try again with another one

@belindavasquez

Print Profile

Standard Profile, 0.2mm layer, 3 walls, 15% infill

easy print, need to break in

@user_1202232627

Print Profile

Standard Profile, 0.2mm layer, 3 walls, 15% infill

@warl0rd_Th0r

Print Profile

A1 Mini Print Profile, 0.2mm layer, 3 walls, 15% infill

I love the idea and the print is a functional fidget, but putting it onto a keyring is difficult. Great tool to explain how gears work.

@user_2146661292

Print Profile

Standard Profile, 0.2mm layer, 3 walls, 15% infill

Nice to play with. A little bit big for a normal key.

@flex0011

Print Profile

Standard Profile, 0.2mm layer, 3 walls, 15% infill

I’m not sure what’s going on but I’ve tried this models 4 times with different beds and filaments but it seems to fail each time. as if it’s hitting the print and dislodging it. I’ll try again but not from the Handy app and see if that helps

@margaretj5

Print Profile

Standard Profile, 0.2mm layer, 3 walls, 15% infill

printed ok, but did not spin smoothly