Pistachio Bowl by Upcrid

Upcrid

Household>Other House Models

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.2mm layer, 3 walls, 10% infill

Designer

29.9 h

3 plates

3.0(1)

Open in Bambu Studio

Boost

Released

Description

Hello friends, today I wanted to bring on my profile, a nice object very useful on the table, a beautiful pistachio holder, with a slot to slide down the skins.

I created various profiles for printing, for the most demanding I created a file with the help of ams, while others for those who do not have the ams and still want to print this pistachio holder.

The pistachio holder, is very generous in size, measures 150mm in height and 150mm in width.

I hope that you enjoy this project, and I hope that it suits you, I unfortunately for technical problems, I have not yet been able to print the object, but as soon as I can, I will do it and upload the photos.

A big hug friends and good press.

Comment & Rating (2)

@Heimwerkerbienc

Print Profile

0.2mm layer, 3 walls, 10% infill

Doesn't really look good 😢 X1Carbon Combo

The designer has replied

@Upcrid

You have to lower the print speed, these problems arise when you have a bad calibration and you use a very high speed, the printer allows you to print at 500m/s, but it is not said that whatever you print must necessarily require this speed. You have to lower the print speed and do a calibration, it doesn’t matter anything to have the x1c or the p1p the problem is about the calibration and the print speed.

(Edited)

No more