Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA+ eSun Grey Transmission Distance: 1.4
PLA PolyTerra Cotton White Transmission Distance: 2.5
PLA+ eSun Grey Transmission Distance: 1.4
PLA PolyTerra Cotton White Transmission Distance: 2.5
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Grey
At layer #15 (1.28mm) swap to Cotton White
At layer #19 (1.6mm) swap to Grey
At layer #23 (1.92mm) swap to Cotton White for the rest.