Ford Territory, Falcon etc Speaker Mounts for Rockford Fosgate P1675 to keep the factory look & setup.

Printed in ESUN ABS+

If you cut the connector off the front speakers & crimp some spade lugs on the existing wire is long enough, however you

will have to add approx 100m to the rear wiring for the speakers.

You will need -

16 x M3 x 20mm Machine Screws

16 x M3 Nuts

16 x M3 Nylon Washers for Speaker Side.

Partially place a nut on the machine screw to push into rear hex recess to make it easier

Note, cutout in side of mount will face the in coming/existing wiring direction, mounts are also as marked as D=Drivers, DR=Drivers =Rear Side, P=Passenger & PR=Passenger Read Side.