Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

The Model is 200x200mm in size. Feel Free to adjust the size but don't adjust the z height.

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6.4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #12 (1.04mm) swap to Yellow
At layer #18 (1.52mm) swap to Jade White for the rest.