Colorful Bird 3D Puzzle with various coloring options and easy scaling
- 23 Individual pieces provided for full custom color
- Build plate arrangement for single color prints. Print two or more single color plates in different colors to mix single color parts on multiple birds
- Three color swap build plates to achieve dual color parts to mix on one bird with 6 colors. Available in two different part sorting options.
- Three Kit Cards for either dual color swap with then 6 colors. Or print them single color for then 3 colors per Kit Card Bird.
- Scale the build plates proportionally while the z-height must be a divider of your chosen layer height.
The model is designed for 1.6mm z-height which results in a roughly real life size sparrow of 160mm length. Up-scaling is only limited by your build plate size. Down scaling has been tested up to 0.8mm z-height with a model length of then 80mm.
Print hints
- The color names in the file names are only suggestions but should hint at the type of color to use for a plate. I.e. grey/black suggests any dark color, blue/red the base color. and rose/white a bright highlight color.
Assembly hints
- Start with the center connector and slide the body parts onto it. If the parts do not easily fit, consider to sand the connector plate down a bit. The top side of the print might be not as clean as the build plate facing side and give bad tolerance.
- All the parts are mirrored on the provided 3mf project files. This means you can easily guess their orientation by minding that the build plate facing side of a part is always the outside of the model.