Dark army design from the mr robot series.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 153.11x234.01mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
The Max Depth is 3mm and the Actual Depth is 3.1mm

Filaments Used:
PLA Generic Black Transmission Distance: 0.3
PLA Generic Red Transmission Distance: 4
PLA Generic Gold Transmission Distance: 6
PLA Generic White Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #11 (1mm) swap to Red
At layer #16 (1.4mm) swap to Yellow
At layer #22 (1.88mm) swap to White for the rest.