A1 A1mini Hot End Filament Cutter by RJ Design

RJ Design

3D Printer>3D Printer Accessories

GIF

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Mirrored (improved) 0.16mm layer, 2 walls, 15% infill

Designer

27 min

1 plate

5.0(8)

0.16mm layer, 2 walls, 15% infill

Designer

27 min

1 plate

5.0(4)

Boost

Released

Description

Tired of the magnet pulling the gate closed as you try to put the hot end in?

So was I! The problem is you have to tilt the hot end to load the extra bit of filament in.

This cutter trims that filament. Now you won't have to angle the hot end and the gate won't close on you.

This is a simple but does the job - This design isn't sprung, there's no force multiplier, (it's all you).

For ease of use i've included a small lever to retract the blade.

IT uses the spare cutter blades that come with the printer.

Printing and assembly should be straight forward.

No supports needed, spent a while ensuring this but let me know if you have any issues.

Comment & Rating (20)

@3DKRT

Print Profile

0.16mm layer, 2 walls, 15% infill

Excellent and useful design, will make some minor tweak to cut as the gif, in my case about 1mm of filament is still there. Thanks!

The designer has replied

@RJDesign

Thanks! I did leave a little clearance, as if the blade clashed it wouldn't work at all. Surprised it's that much though. I'll look into it

@ZSBschan

Boosted

Print Profile

Mirrored (improved) 0.16mm layer, 2 walls, 15% infill

Passt alles super ohne Nacharbeit und funktioniert gut. Boost :)

(Edited)

The designer has replied

@RJDesign

Danke

@user_4171533469

Boosted

Print Profile

Mirrored (improved) 0.16mm layer, 2 walls, 15% infill

Cuts filiment well, easy to put together

The designer has replied

@RJDesign

Thanks

@jbuffingtonfami

Boosted

needed

The designer has replied

@RJDesign

Thanks!

@PicPac

Print Profile

Mirrored (improved) 0.16mm layer, 2 walls, 15% infill

works great

(Edited)

The designer has replied

@RJDesign

Thanks

@kymberlea.ryan

Boosted

Solved multiple problems; easy storage and reinstalling in the printer. Fantastic design!

The designer has replied

@RJDesign

Thank you, appreciated

@flynn

Print Profile

0.16mm layer, 2 walls, 15% infill

thanks

@emcy_uk1

Print Profile

Mirrored (improved) 0.16mm layer, 2 walls, 15% infill

@matthiaszeindl

Print Profile

Mirrored (improved) 0.16mm layer, 2 walls, 15% infill

@tattoogimp

Print Profile

Mirrored (improved) 0.16mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.