Simple setup blocks for woodworking in the Metric system. Several common types of wood thicknesses (6mm, 12mm, 18mm) are included as well as more generic ones. I included 1.45mm because that is the thickness of my saw blade. Blocks can be combined to gauge most sizes (for instance 1mm + 4mm for a 5mm gauge). I made this because the others I could find didn't really appear to be optimised for 3d printing nor for the AMS.

It is possible to print without the AMS, just load in the step files in Bambu Studio and remove the name object. Then you'll have an indented version.

Make sure to print on a non-textured build surface and make your layer size a multiple of the total. Also I prefer to put the name-side down, it'll eliminate any unwanted bulges. The 3mf files I've included all already do this. 0.5 and 1.45 are separate because they have to be printed with different layer sizes.

On my X1C the tolerance apears to be about ±0.03mm, so not too shabby.