Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x133.87mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 0.96mm
Filaments Used:
PETG Kingroon black Transmission Distance: 0.3
PETG Kingroon red Transmission Distance: 3
PETG Kingroon white Transmission Distance: 6
This print uses 3 unique filaments
Swap Instructions:
Start with black
At layer #7 (0.64mm) swap to red or gray
At layer #9 (0.8mm) swap to white for the rest.