更新：

修改了平台5的两个构件“凛支撑2”（请看第五盘的两个柱子“凛支撑”、“凛支撑2”是否一样，如果一样请重新下载文件，如果打印出来了也可以保留柱子，下一个亭子也会有一样的结构，如果对你造成了困扰，对此我表示很抱歉）

打印建议：

1.屋面使用0.16的层高，在调整缩放的时候需要在x处多加2%

2.不建议打印太小，理想比例是70%，可发大到90%

3.所有构件都可以使用0.4的喷嘴打出，如果你追求高质量可以使用0.2的喷嘴打印某个构件，如屋面

4.stl是100%的文件请自行选择合适的大小缩放

5.由于某些原因，如果遇到孔洞太小的问题请调整xy补偿

6.导入stl时提示“是否要转换成毫米要点是”

详细解释请看此视频

Detailed：

update：

Modified two members of Platform 5 "凛支撑2"（Please see if the two pillars of the fifth disc "凛支撑" and "凛支撑 2" are the same, if they are the same, please re-download the file, if you print it out, you can keep the columns, and the next pavilion will also have the same structure, if it bothers you, I apologize for this）

Printing Suggestions:

1. Use a floor height of 0.16 for the roof, and you need to add 2% more at x when adjusting the scale

2. It is not recommended to print too small, the ideal ratio is 70%, and the size can be as large as 90%

3. All components can be printed with 0.4 nozzles, if you pursue high quality, you can use 0.2 nozzles to print a certain component, such as roofing

4. STL is 100% file, please choose the appropriate size to zoom

5. Due to some reasons, if you encounter the problem that the hole is too small, please adjust the XY compensation

6. When importing STL, it prompts "Do you want to convert to millimeters"

安装动画：

Install animations：