Luigi from Super Mario (HueForge)

After drawing Super Mario, some colleagues asked me for a similar one of Luigi, after some tests this has been one of the best results, but I don't think I have managed to match Mario's, but I still hope you like it.

I invite my colleagues to make remixes with other colors, and I would appreciate it if you could send a photo of the results, some of you will surely get better results.

I include original photo that I created, in case you want to experiment directly with HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Pro Metallic Blue Transmission Distance: 0.3
PLA PolyTerra Forest Green Transmission Distance: 0.5
PLA PolyTerra Arctic Teal Transmission Distance: 0.5
PLA PolyLite Pro Cold White Transmission Distance: 0.5

Swap Instructions:
Start with Metallic Blue
At layer #9 (0.8mm) swap to Forest Green
At layer #16 (1.36mm) swap to Arctic Teal
At layer #21 (1.76mm) swap to Cold White for the rest.