Carabiner Key Ring by snize

snize

Tools>Other Tools

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.08mm layer, 2 walls, 15% infill

Designer

28 min

2 plates

4.9(16)

Open in Bambu Studio

Boost

156

128

Released

Description

Springless PLA carabiner, perfect for keyrings and other small items. Includes two models with nearly identical profiles but different heights and thicknesses.

Model A features higher strength compared to Model B
Model B has a sleeker look than Model A

Choose the one that best fits your preferences and needs.

キーリングなどの小物に最適なバネを使わないPLA製カラビナ。外形はほぼ同じですが、高さと厚みがそれぞれ異なるモデルが２つ含まれます。

モデルAは、モデルBと比べて強度が高いのが特徴
モデルBは、モデルAよりもシャープな印象

お好み合わせてご利用ください

carabiner

karabiner

keyring

Comment & Rating (27)

@salve

Print Profile

0.08mm layer, 2 walls, 15% infill

Good.

The designer has replied

@snize

Thanks!

@lacriella

Boosted

Print Profile

0.08mm layer, 2 walls, 15% infill

Perfect quality!

The designer has replied

@snize

Thank you! I think Roll Eye is perfect for carrying around.

(Edited)

@Piano

Boosted

Beautifully Simple Design that is Fast and Easy to Print. I use these all around my house from the keyring for my shed keys to a hook to hang a hummingbird feeder. Probably not the strongest or most secure key ring, although I haven’t broken any yet with all my uses, I would be careful using it for important keys in cases where they could be lost.

The designer has replied

@snize

I don't know how heavy the hummingbird feeder is, but this design is not intended for long-term loads, so please check regularly to ensure there are no issues. As for the keys, please handle them with care. In the future, I will consider incorporating a locking mechanism to ensure safety, without compromising the simplicity of the design.

@nathxnazuur

Print Profile

0.08mm layer, 2 walls, 15% infill

very good

@insle

Print Profile

0.08mm layer, 2 walls, 15% infill

erfüllt seinen Zweck

@user_3620245991

Hi, I'm new to 3D printing. Model looks and prints great, I printed it, but I would like to resize to smaller (10x30x3mm) and then keep the thicknes of the material to make it stronger. How do I do that, Please? I'm thinking of model A.

(Edited)

The designer has replied

@snize

How about reducing the size by half in Bambu Lab Studio, except for the thickness, and then cloning the object and stacking the two layers together? I haven't tried this myself, but if it works, please let me know! This video might also be helpful: https://www.youtube.com/watch?v=DZ_D7oA0YzU.

@user_3620245991

Thanks, I will try it out. I can resize but how do I keep the thickness ? I can resize X and Y to half and keep Z- hight but then thickness is still reduced.

(Edited)

@delibelli

Print Profile

0.08mm layer, 2 walls, 15% infill

these work well! thanks.

The designer has replied

@snize

Glad to hear that!

@Bearrr

Print Profile

0.08mm layer, 2 walls, 15% infill

worked great, printed in petg

The designer has replied

@snize

Sounds great, I'd like to try printing with PETG as well.

@OopsAllBeans

Print Profile

0.08mm layer, 2 walls, 15% infill

I had broken a metal one while walking my dogs and needed something quickly and these have done great. My dog pulled a bit too hard and snapped one on the first go, but the second one that I made has held up really well! great little design and super happy to have found a simple, easily replaceable design! :)

The designer has replied

@snize

Glad to hear it was helpful!