Description

This caliper mount uses minimalist arms to create a floating effect, use this mount to organize your tools in a sleek and stylish way. in just a singular part create a beautiful organization in under an hour of printing. 

Instructions

1. first choose between screw mount or adhesive mounting and pick the appropriate model for your use.
2. you can either use double sided tape or blu tack for the adhesive or use 3mm wide appropriately sized length.
3. Place the calipers in the mount and line up with the desired angle, remove the calipers and either mark the screw points or apply adhesive.
4. Sit back and admire your new “Caliper Cradle”.

Print settings

Layer hight: 0.16mm

supports: NO

Nozzle: 0.4mm