我制作了一款呆猫冰箱贴,不建议将填充度设置太高,否则重量将影响吸附性。
我在呆猫的两只耳朵部位预留了放置磁铁的孔位,并在切片设置中加入了暂停打印,暂停后放入磁铁即可。总共需要2枚直径为25mm、厚度为2mm的圆形磁铁。
为了提供足够的余量,面部嵌入头部后需要使用胶水固定。
如果您对打印接缝处设置不满意,可以自行修改相关设置。
你所需要额外准备的非3D打印材料
1.直径25mm厚度2mm的圆形磁铁2枚
2.—瓶胶水
The following content comes from Google Translate:
I made a monster hunter felyne cat refrigerator magnet. It is not recommended to set the filling level too high, otherwise the weight will affect the adsorption.
I reserved holes for placing magnets on the two ears of the felyne cat , and added a pause printing in the slicing settings. After pausing, I can put the magnets in. A total of 2 circular magnets with a diameter of 25mm and a thickness of 2mm are required.
In order to provide enough margin, the face needs to be fixed with glue after it is embedded in the head.
If you are not satisfied with the print seam settings or print speed settings, you can modify the relevant settings yourself.
Additional non-3D printing materials you need to prepare
1.Round magnet with diameter 25mm and thickness 2mm x 2PCS
2.A bottle of glue