Tip jar ♥ https://ko-fi.com/cosmicnimbus 
Patreon - https://patreon.com/CosmicNimbusPrinting 
Gumroad - https://cosmicnimbus.gumroad.com

Hi !

I looked around at different stands for ipads to remix for my Wacom Pro 13, but wanted something a bit more sturdy. So I came up with this bad boy

After printing the stand at 5 degrees lean back, it turned out to be not quite enough for the viewing angle and for the wacom's centre of gravity. So I made some chocks to add to my print that makes the stand 10 degrees lean (I didn't want my print to go to waste). I made a version that is 10 degrees of lean for others to print.

The stand prints as 3 main pieces, the two legs, and middle section. They all clip together firmly. 

If you want to make the stand a different size, you can resize all the parts in your slicer, or just change the width of the middle section's model to make it narrower - just make sure if you do this that you don't change the sizes of the clips, as they fit perfectly as they are.

Happy printing !