This is a 4 switch panel for the cubby in a 5th gen 4runner. Theres also a cutout to retain the factor cig lighter but without that, theres room for 2 more switches (will need to modify file). 

This requires permanent dremel removal of placstic behind the cubby. 

m5 sized holes. Needs 5 m5 screws or bolts. i used button head screws with a nut and lock washer behind. 

The switch size are contura (.83" x 1.45"). These are NOT the same size as the oem switches. If you order from someone like CH4x4 you will need one size switch for the oem slots, and a different size for this switch panel. 

printed in paht-cf but could also use abs. 

need something to resist the high heat of a car in the sun so dont recommend pla.