Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Geeetech White Transmission Distance: 5
PLA Geeetech Black Transmission Distance: 0.6
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to White
At layer #19 (1.6mm) swap to Black
At layer #23 (1.92mm) swap to Dark Red for the rest.
If you wanna use a Red with a higher TD then I recommend swapping to Red at layer #20