Another “Art Deco” Hueforge : This time it's Carl from my favorite Pixar movie : Up !

The dimensions are 180x180 mm so it fits nicely in a square frame.

You can print frames that are compatible with my “Art Deco” Hueforges via this link :

https://makerworld.com/en/models/194571

I made 2 versions, a 6 color and 4 color version. Check the pictures for both versions.

6 Color version =

Black → Blue → Red → Orange → Yellow → White

4 Color version =

Black → Blue → Orange → White

I changed the thickness of the base layer, now it's 1 mm, this creates a much stronger/durable end result.

I added a Height Range Modifier so that first 1mm gets printed at 0.2 layer height (instead of 0.04). This also results in a faster print result.

I also removed the Prime Tower , it isn't really needed for Hueforges

Swap Instructions (when all layers are 0.04)
 

6 Color Version :

Start with Black
At layer #30 (1.2mm) swap to Blue
At layer #37 (1.48mm) swap to Red
At layer #41 (1.64mm) swap to Orange
At layer #43 (1.72mm) swap to Yellow
At layer #64 (1.84mm) swap to Jade White for the rest.
 

4 Color Version :

Start with Black
At layer #31 (1.24mm) swap to Blue
At layer #39 (1.56mm) swap to Orange
At layer #44 (1.76mm) swap to White for the rest.
 

Reminder : I share these works for free for hobbyists, you can even print them as gifts for friend and family.

If you like my work a Boost on Makerworld is always appreciated!

Or if you want you could give me a tip or "buy me a coffee" on :  https://ko-fi.com/3deekes

If you are interested in selling any of my current and future releases send me a message to info@3deekes.be