Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
2.6 h
1 plate
Open in Bambu Studio
Boost
2
4
4
0
5
3
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 113.09x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.5mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #10 (0.88mm) swap to Jade White
At layer #12 (1.04mm) swap to Red for the rest.
Comment & Rating (4)
All
Print Profile
0.08mm layer, 2 walls, 100% infill
excellent
The designer has replied
1
Reply
Glad you like it thank you
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
The designer has replied
1
Reply
thank you
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld