hand in cobweb string art

printed in yousu galaxy black

*please read carefully*

walls set to archane

i will start by saying you are likely encounter at least a couple of failed strings.
the strings that run from the frame to the centre prints twice, this is on purpose and gives two chances of the string adhering. if both strings complete they will fuse together.
if any string fail simply snip them of after its complete or you can pause during the print and carefully do as you go.
you could equally be lucky and have no failed strings.

the web part circles once and haven't had any issue.

i would suggest to print the strings a different colour, it prints differently if its all one colour and doesn't work well. i included a 3mf pre coloured.

0.4 nozzle, 0.2 layer height. if you deviate from this you will get errors slicing.
ignore the "you have floating regions" warning.

finally i have printed on Bambulab A1, i have not tested on another printer and cannot guarantee it working as expected.