Fargo movie poster fridge magnet.

Measuring 66mm wide by 96mm high by 5mm deep

This model requires 2 x AMS units to print

6 colour Bambu AMS print, using Black, White, Red, Gold/yellow, beige and Ash grey.

This needs 4x 8mm diameter by 2mm deep magnets, the magnets push into the model after printing, no need to pause.

NOTE - The magnets are designed to be a tight fit. The best way to insert them is to line up a magnet with a hole then place the model on a hard flat surface facing up, with the magnet on the hard surface, then press down firmly on the model. The magnet will snap into place. Repeat for each magnet.