MJ Flying

Jordan Taking flight. I only use numakers It works great in the AMS and prints great.

Use this link for a discount.

https://numakers.com/?ref=09v0k1co

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200.55x112.81mm in size
You may print at higher layer heights below the Min Depth of 0.88mm
The Max Depth is 2.6mm and the Actual Depth is 2.7mm

Filaments Used:
PLA+ Numakers Pitch Black Transmission Distance: 1.6
PLA+ Numakers Light Gray Transmission Distance: 3.2
PLA+ Numakers Pure White Transmission Distance: 4.8
PLA+ Numakers Nuclear Red Transmission Distance: 4.8
This print uses 4 unique filaments

Swap Instructions:
Start with Pitch Black
At layer #14 (1.2mm) swap to Light Gray
At layer #17 (1.44mm) swap to Pure White
At layer #21 (1.76mm) swap to Pitch Black
At layer #22 (1.84mm) swap to Nuclear Red for the rest.