IKEA Kallax Reinforcement
IKEA Kallax Reinforcement
Boost
50
110
23
Print Profile(1)
0.2mm layer, 4 walls, 15% infill
Designer
4.1 h
2 plates
Open in Bambu Studio
Boost
50
110
23
3
96
90
Released
Description
The IKEA Kallax shelf is prone to strong vibrations when used as a shelf for a 3D printer. This reinforcement improves the rigidity of the structure and reduces vibrations during rapid printing movements.
Tip: Wood glue or double-sided tape under the angle improves the damping effect.
Comment & Rating (23)
All
Hi, could you please explain if this is what you mean by under the angle ?
Should add tape / glue under that corner ?
Thx
0
Reply
Glue the lengths held down by screws.
0
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
echt super.
0
Reply
Boosted
Print Profile
0.2mm layer, 4 walls, 15% infill
1
Reply
Boosted
Print Profile
0.2mm layer, 4 walls, 15% infill
The sizing was a little bit off for me, but my Kallax is probably 10 years old. I wouldn't be surprised if the thickness of the top/sides has changed a little. I was able to install it easily though, and it did a great job.
0
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
Sturdy
0
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
Perfect for my kallax
0
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
2mm gap makes for a challaging print
0
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
Strength Issue
0
Reply
Print Profile
0.2mm layer, 4 walls, 15% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Share Alike
© 2024 MakerWorld