为了方便大家调整尺寸，我已经上传了solidworks源文件！

For the convenience of adjusting the size, I have uploaded the SolidWorks source file!

希望你喜欢~
Wish you like it.
期待你的反馈！
Looking forward to your feedback.

1.RA97显色指数，不频闪对眼睛友好。

1. RA97 color rendering index, non-flickering, eye-friendly.

2.灯带越宽越难做非对称光路，这一款屏幕挂灯因为追求照明度，放弃了非对称光路。但设计了较长的遮罩来减少照射到屏幕上的光线。实际使用下来完全不影响屏幕显示。

2. The wider the strip light, the more difficult it is to create an asymmetric light path. This screen-mounted light fixture sacrifices the asymmetric light path in pursuit of brightness, but it uses a longer mask to reduce the light shining onto the screen. In actual use, it does not affect the screen display at all.

3.通过刀片效应来减少反射入眼中的光线。左侧是增加纹理后的反光效果。

3. Reduce the light reflection entering the eyes through the blade effect. The left side shows the reflection effect after adding texture.

4.灯带上方大面积镂空最大化散热，缺点是容易积灰。

4. The large hollow area above the strip light maximizes heat dissipation, but the downside is that it is prone to dust accumulation.

5.使用大疆运动相机支架，可调角度适应各种显示器，主要是耐用程度远大于打印制品，可以考虑用热熔胶粘贴底座，十分牢固。

5. It uses a DJI sports camera bracket that can adjust the angle to fit various monitors. It is much more durable than printed products. Consider using hot glue to attach the base, which is very secure.

6.安装简单，基本上打印出来就知道怎么安装了，m3螺丝拧紧即可，可以用热熔螺母，也可以直接螺丝螺母固定。另一侧可以使用胶带贴一下更加紧固。

6. Installation is simple. Basically, you will know how to install it once you print it out. Tighten the M3 screw, and you can use hot-melt nuts or directly screw and secure with nuts. You can also use tape on the other side for additional reinforcement.