JJTechPrints

Finally was able to print the cup successfully on A1 Mini.  I've uploaded my print profile too. This beverage holder is awesome @TunacanTech 

Tuna

Hi Tuna, do you have any advice on printing the cup.stl? I'm printing on an A1 Mini. I've tried using Bambu filament, Generic filament, dialing filament in with overhang tests, nothing seems to prevent the cup from being knocked off the print bed.  I'm also downloading a timelapse video of the failure to inspect more closely.

this item is so useful! thanks Tuna for this awesome design 

Em_Teun

could you model one for a tumbler instead of a can?

Salazar Customs

booie1966

mower beverage holder, 0.2mm layer, 2 walls, 15% infill

Rosie

BigLeBouska

0.2mm layer, 2 walls, 15% infill

rjhanny

cover

20240507_104843_d4a57273-bb25-42a5-b754-8c34620e9ad6.jpg

20240507_105949_8f2fbe3e-2808-407b-96ff-1eac9061cb40.jpg

20240507_104826_fb4386f1-8ea6-4a3d-bc4c-e37ca83172f4.webp

plate_1.png

Everything is positioned to not use supports. The only thing is you can play around with the infill to get the clamp to be more flexible.

PXL_20240510_203912200_4d927754-7941-4b84-85d8-51ce1b87ad02.webp

plate_1.webp

PXL_20240510_131958989_efa7693d-c081-4b0f-af71-68605a89dbaa.webp

PXL_20240510_131954193_87296f33-4a24-406a-922c-11ff186da425.webp

This print profile is considerably longer than the original design, but this is due to some issues I encountered printing on an A1 mini. There is a photo included of all of my misprints. &nbsp;Also while only the cup section is photographed, all three parts are included on the single print plate.&nbsp;This model includes a large brim, slower print speeds for overhangs and a slow down for the troublesome layers that make up the arch.&nbsp;There may be some noticeable visual effects of going from normal print speeds to slow speeds, but this does not detract from its functionality.&nbsp;&nbsp;If you're using an A1 Mini and possibly an A1 or if you're having issues printing the original design, this print profile should help you out.&nbsp;This is an awesome design that levels up your mowing experience!

First mow of the year, and I thought to myself I&#39;m thirsty. So, after all of the prototyping stage This is what I settled on. I originally used abs, but it was a little too stiff for the clamping, so I decided on asa to get the uv protection. The screws and bolts were designed around some typical bolts at the hardware store. The cup was made to fit a standard 12 oz. can. If anyone wants a different size, I&#39;m willing to model it up. personally, I was thinking a tall boy cup for those longer mows. Also, don&#39;t over tighten. This project was full effort, so I gave you guys a picture of all the prototypes to show you what some of these projects take to complete.

Print Profile(2)

Description

Comment & Rating (11)

License

Related Models

Bogg Bag Stanley Cup Holder

Heavy duty Modular hooks

Cooler Cube - Fully 3D printed 4 can coolor

Table

Lawnmower Beverage Holder