First mow of the year, and I thought to myself I'm thirsty. So, after all of the prototyping stage This is what I settled on. I originally used abs, but it was a little too stiff for the clamping, so I decided on asa to get the uv protection. The screws and bolts were designed around some typical bolts at the hardware store. The cup was made to fit a standard 12 oz. can. If anyone wants a different size, I'm willing to model it up. personally, I was thinking a tall boy cup for those longer mows. Also, don't over tighten. This project was full effort, so I gave you guys a picture of all the prototypes to show you what some of these projects take to complete.