Tribute to Theoden in The Lord of the Rings.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x150mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA Protopasta Good as Gold Transmission Distance: 5

PLA BambuLab Matte Sakura Pink Transmission Distance: 3

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #9 (0.8mm) swap to Good as Gold

At layer #16 (1.36mm) swap to Sakura Pink

At layer #18 (1.52mm) swap to Jade White for the rest.