Another “Art Deco” Hueforge : Chewbacca !

The dimensions are 180x180 mm so it fits nicely in a square frame.

You can print frames that are compatible with my “Art Deco” Hueforges via this link :

https://makerworld.com/en/models/194571

Black → Blue → Brown → White

I changed the thickness of the base layer, now it's 1 mm, this creates a much stronger/durable end result.

I added a Height Range Modifier so that first 1mm gets printed at 0.2 layer height (instead of 0.04). This also results in a faster print result.

I also removed the Prime Tower , it isn't really needed for Hueforges

Swap Instructions (when all layers are 0.04)
 

Start with Black
At layer #28 (1.16mm) swap to Marine Blue
At layer #36 (1.44mm) swap to Brown
At layer #42 (1.68mm) swap to White for the rest.
 

Reminder : I share these works for free for hobbyists, you can even print them as gifts for friend and family.

If you like my work a Boost on Makerworld is always appreciated!

Or if you want you could give me a tip or "buy me a coffee" on :  https://ko-fi.com/3deekes

If you are interested in selling any of my current and future releases send me a message to info@3deekes.be