Dredd movie poster fridge magnet.
Measuring 66mm wide by 96mm high by 5mm deep
This model requires 2 x AMS units to print
7 colour Bambu AMS print, load your slots as below
1 - black
2 - white
3 - blue
4 - red
5 - light gold
6 - beige
7 -grey
This needs 4x 8mm diameter by 2mm deep magnets, the magnets push into the model after printing, no need to pause.
NOTE - The magnets are designed to be a tight fit. The best way to insert them is to line up a magnet with a hole then place the model on a hard flat surface facing up, with the magnet on the hard surface, then press down firmly on the model. The magnet will snap into place. Repeat for each magnet.