Hier habe ich ein LOVE Hueforge Bild für euch. Entweder die liebe zu deiner Mama als zb. ein Geschenk zu Muttertag oder aber die Liebe zu einer Person, die dir im Leben wichtig ist. Auch für Ehepartner-Partner geeignet, was man zwischendurch mal verschenken kann. Daher macht anderen eine Freude und druck es dir aus. Und das gute ist, ich habe meine besten Druck Profile in der Datei hinterlegt für die Tex Pei Platte. Für meine Druckprofile habe ich bisher super Bewertungen bekommen.
Das Bild ist 200x200 und ihr könnt es auch gerne kleiner drucken. Den passenden Rahmen habe ich in meinem Profil.
Werden die Farben bei euch im Slicer geändert durch die 3mf dann macht einfach einen resync, dann sollte alles wieder passen.
Drucker muss dafür aber an sein.
Freue mich über nettes Feedback oder eine Bewertung
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #11 (0.96mm) swap to White for the rest
------------------------------------------------------------------------------------------------------------------------------------
Here I have a LOVE Hueforge picture for you. Either love for your mom as a gift for Mother's Day or love for a person who is important to you in life. Also suitable for spouses and partners, which you can give as a gift every now and then. Therefore, make others happy and print it out for yourself. And the good thing is, I've saved my best print profiles in the file for the Tex Pei plate. I've gotten great reviews for my print profiles so far.
The image is 200x200 and you can also print it smaller. I have the right frame in my profile.
If the colors are changed in the Slicer by the 3mf then simply do a resync and everything should work again.
But the printer has to be on for this.
I'm looking forward to some nice feedback or a rating
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #11 (0.96mm) swap to White for the rest
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.