Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x254.02mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA BambuLab Matte Charcoal Black Transmission Distance: 0.3
PLA BambuLab Matte Scarlett Red Transmission Distance: 1.9
PLA BambuLab Glow Pink Transmission Distance: 5.1
PLA BambuLab Matte White Transmission Distance: 3.5
PLA Polyterra Savanah Yellow Transmission Distance: 3.4
This print uses 5 unique filaments

Swap Instructions:
Start with Charcoal Black
At layer #13 (0.64mm) swap to Scarlett Red
At layer #16 (0.76mm) swap to Pink
At layer #23 (1.04mm) swap to White
At layer #40 (1.72mm) swap to Savanah Yellow for the rest.