More Art as requested by my daughter for her room. Thought Id share incase someone else has a little princess that needs more wall decor.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Matte Charcoal Black Transmission Distance: 0.3
PLA Polyterra ArcticTeal Transmission Distance: 0.1
PLA Polyterra Savanah Yellow Transmission Distance: 3.4
PLA BambuLab Matte Scarlett Red Transmission Distance: 1.9
PLA BambuLab Matte Sakura Pink Transmission Distance: 2.3
PLA Polyterra Banana Transmission Distance: 3.8
PLA BambuLab Matte White Transmission Distance: 3.5
This print uses 7 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #10 (0.52mm) swap to ArcticTeal
At layer #26 (1.16mm) swap to Savanah Yellow
At layer #34 (1.48mm) swap to Scarlett Red
At layer #36 (1.56mm) swap to Sakura Pink
At layer #43 (1.84mm) swap to Banana
At layer #49 (2.08mm) swap to White for the rest.