All the designs i upload, i have to print first, and that's a lot of filament 😬 And filament isn't free..

So, if you like my work you could

buy me a coffee if you like. 😉

https://www.buymeacoffee.com/a.vdh_83

Or a donation via Paypal is also much appreciated.
https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.8
PLA BambuLab Basic Cyan Transmission Distance: 4.8
PLA BambuLab Magenta Transmission Distance: 4
PLA BambuLab Basic Red Transmission Distance: 4.8
PLA BambuLab Basic Yellow Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 4.8
PLA eSUN White Transmission Distance: 1.6

Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Cyan
At layer #13 (1.12mm) swap to Magenta
At layer #14 (1.2mm) swap to Red
At layer #18 (1.52mm) swap to Yellow
At layer #21 (1.76mm) swap to Orange
At layer #22 (1.84mm) swap to White for the rest.