Pretty, simple and easy DIY lamp.
You need to use:
- Bulbsocket (We used E27 bulb)
- Bulb
- Cable with a on/off switch
Eventually use superglue to glue the top and bottom onto the lampshade.
Lampshade printed in vasemode with 0 bottom layers.
You can also print just in vasemode with bottom layers and then dont use the top.
5-10% infill
No support
Printed in regular PLA. Black for base/top/bottom and lithophane white for the lampshade.
Height of the lamp is 30 cm
Base is 11x20 cm
Lampshade is 20x10 cm
Have fun printing :)