Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 169.74x239.99mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Pine Green Transmission Distance: 1
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Pine Green
At layer #13 (1.12mm) swap to BambuLab Green
At layer #18 (1.52mm) swap to Yellow for the rest.