BING 3D Printer Filament 必应改中轴紧固于ams lite或ams中轴干燥仓

中国制造的“必应” “BING 3D ”品牌的3d打印耗材丝 Printer Filament ， 料盘无法牢固的固定在ams lite线轴当中，使用中会出现脱落或者卡住难以取下来，我设计了一个模型用于改善这种情况，经过测试已经完全解决问题，可以用于牢固的结合在ams lite线轴上使用，并且可以在ams里面当作干燥剂的存储仓使用，也能够增加料盘的重量用于配重防止料盘在ams中跳跃。

本人不对使用这个模型过程中出现的一切意外或者损失负责，请模型下载者自行负责。

本模型不能用于一切商业行为！

The 3D printing filament by the Chinese-manufactured "Bing" or "BING 3D" brand cannot be securely fixed onto the AMS Lite spool holder. During usage, it may come loose or get stuck, making it difficult to remove. I have designed a model to address this issue, and after testing, it has completely resolved the problem. It can securely attach to the AMS Lite spool holder and can also be used inside the AMS as a storage compartment for desiccants. Additionally, it can increase the weight of the filament spool to prevent it from jumping inside the AMS.

I am not responsible for any accidents or losses that may occur during the use of this model. Users who download the model are responsible for their own actions. This model cannot be used for any commercial purposes!