Toonafeesh

cover

IMG_20240504_124041112_6b842177-4b0f-46ad-b8c5-682d42d9ede6.jpg

IMG_20240504_124045158_2ebc1293-f996-4279-8dc1-e93394a03263.jpg

IMG_20240504_124056311_HDR_2f99e6f2-2b38-43ff-a408-33d84a3e912a.jpg

plate_1.png

plate_2.png

plate_3.png

IMG_20240504_124028446_HDR_adb85ca2-a56a-4df1-aecb-bac8c9d0a2d9.webp

0.2mm layer, 2 walls, 15% infill

Half Wing 1

Half Wing 2

woolster80

Screenshot 2025-04-12 at 02.48.37.png

I wanted the model bigger and I wasn&#39;t a fan of the supports to enable the wings to print. I&#39;ve increased the size so the wings cover the majority of the bed (A1/P1S etc) and have split them into two parts to enable them to be printed flat without supports. Each section will need to be printed twice.&nbsp;Also found the pegs for the main body were slightly too long so have adjusted those to suit.&nbsp;Made some minor changes to the colours to reduce print time slightly.

Increased size. Wings split to print without supports.

This is a low poly tie fighter I created for Star Wars day. &nbsp;I used Polymaker Polysupport for the wings to get a smooth surface and I used CA glue to hold it all together. I&#39;ll have a youtube video soon documenting how I did it all.&nbsp;0.2 layer heightCan be printed on the A1 Mini!&nbsp;Materials Used:<ul><li>Elegoo gray</li><li>Elegoo black</li><li>Elegoo red</li><li>PolyMaker PolySupport</li></ul>

Low Poly Tie Fighter - Star Wars

ASIA

Print Profile(2)

Description

Comment & Rating (24)

License

Related Models